View 74LVC1G66GW_1202661.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
DATA SHEET
74LVC1G66 Bilateral switch
Product specification Supersedes data of 2002 Nov 15 2004 Apr 13
Philips Semiconductors
Product specification
Bilateral switch
FEATURES * Very low ON resistance: - 7.5 (typical) at VCC = 2.7 V - 6.5 (typical) at VCC = 3.3 V - 6 (typical) at VCC = 5 V. * Switch handling capability of 32 mA * High noise immunity * CMOS low power consumption * Latch-up performance exceeds 100 mA per JESD78 Class II * Direct interface TTL-levels * Multiple package options * ESD protection: - HBM EIA/JESD22-A114-B exceeds 2000 V - MM EIA/JESD22-A115-A exceeds 200 V. * Specified from -40 to +85 C and -40 to +125 C. QUICK REFERENCE DATA Ground = 0 V; Tamb = 25 C; tr = tf 3.0 ns. SYMBOL tPZH/tPZL tPHZ/tPLZ CI CPD CS PARAMETER turn-ON time E to VOS turn-OFF time E to VOS input capacitance power dissipation capacitance switch capacitance CL = 50 pF; fi = 10 MHz; VCC = 3.3 V; notes 1 and 2 OFF-state ON-state Notes 1. CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD x VCC2 x fi + {(CL + CS) x VCC2 x fo} where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; CS = switch capacitance in pF; VCC = supply voltage in Volts; 2. The condition is VI = GND to VCC. CONDITIONS CL = 50 pF; RL = 500 ; VCC = 3 V CL = 50 pF; RL = 500 ; VCC = 5 V CL = 50 pF; RL = 500 ; VCC = 3 V CL = 50 pF; RL = 500 ; VCC = 5 V DESCRIPTION
74LVC1G66
The 74LVC1G66 is a high-speed Si-gate CMOS device. The 74LVC1G66 provides an analog switch. The switch has two input/output pins (Y and Z) and an active HIGH enable input pin (E). When pin E is LOW, the analog switch is turned off.
TYPICAL 2.5 1.9 3.4 2.5 2 12.0 6.5 11
UNIT ns ns ns ns pF pF pF pF
2004 Apr 13
2
Philips Semiconductors
Product specification
Bilateral switch
FUNCTION TABLE See note 1. INPUT E L H Note 1. H = HIGH voltage level; L = LOW voltage level. ORDERING INFORMATION PACKAGE TYPE NUMBER 74LVC1G66GW 74LVC1G66GV PINNING PIN 1 2 3 4 5 Y Z GND E VCC SYMBOL independent input/output independent output/input ground (0 V) enable input (active HIGH) supply voltage DESCRIPTION TEMPERATURE RANGE -40 to +125 C -40 to +125 C PINS 5 5 PACKAGE SC-88A SC-74A MATERIAL plastic plastic SWITCH OFF ON
74LVC1G66
CODE SOT353 SOT753
MARKING VL V66
handbook, halfpage handbook, halfpage
Y1 Z2 GND 3
MNA074
5 VCC Y Z
66
4 E E
MNA657
Fig.1 Pin configuration.
Fig.2 Logic symbol.
2004 Apr 13
3
Philips Semiconductors
Product specification
Bilateral switch
74LVC1G66
handbook, halfpage
Z
handbook, halfpage
1 4#
1 1 X1
MNA076
2 Y E
VCC
MNA658
Fig.3 IEC logic symbol.
Fig.4 Logic diagram.
RECOMMENDED OPERATING CONDITIONS SYMBOL VCC VI VO Tamb tr, tf PARAMETER supply voltage input voltage output voltage operating ambient temperature input rise and fall times VCC = 1.65 to 2.7 V VCC = 2.7 to 5.5 V active mode VCC = 0 V; Power-down mode CONDITIONS 0 0 0 -40 0 0 MIN. 1.65 MAX. 5.5 5.5 VCC 5.5 +125 20 10 V V V V C ns/V ns/V UNIT
2004 Apr 13
4
Philips Semiconductors
Product specification
Bilateral switch
74LVC1G66
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V). SYMBOL VCC IIK VI VO IOS ICC, IGND Tstg Ptot Notes 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. When VCC = 0 V (Power-down mode), the output voltage can be 5.5 V in normal operation. DC CHARACTERISTICS At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL PARAMETER OTHER Tamb = -40 to +85 C; note 1 VIH HIGH-level input voltage 1.65 to 1.95 0.65 x VCC - 2.3 to 2.7 2.7 to 3.6 4.5 to 5.5 VIL LOW-level input voltage 2.3 to 2.7 2.7 to 3.6 4.5 to 5.5 ILI IS input leakage current (control pin) analog switch OFF-state current analog switch ON-state current ICC quiescent supply current VI = 5.5 V or GND VI = VIH or VIL; |VS| = VCC - GND; see Fig.5 VI = VIH or VIL; |VS| = VCC - GND; see Fig.6 VI = VCC or GND; VS = GND or VCC; IO = 0 5.5 5.5 1.7 2.0 0.7 x VCC - - - - - - - - - - - - 0.1 0.1 - - - - 0.7 0.8 0.3 x VCC 5 5 V V V V V V V A A VCC (V) MIN. TYP. MAX. UNIT PARAMETER supply voltage input diode current input voltage output voltage maximum switch current VCC or GND current storage temperature power dissipation Tamb = -40 to +125 C; note 2 VI < 0 note 1 active mode; notes 1 and 2 Power-down mode; notes 1 and 2 VO = 0 to VCC CONDITIONS - -0.5 -0.5 -0.5 - - -65 - MIN. -0.5 MAX. +6.5 -50 +6.5 +6.5 50 100 +150 250 V mA V V mA mA C mW UNIT
VCC + 0.5 V
1.65 to 1.95 -
0.35 x VCC V
5.5
-
0.1
5
A
5.5
-
0.1
10
A
2004 Apr 13
5
Philips Semiconductors
Product specification
Bilateral switch
74LVC1G66
TEST CONDITIONS SYMBOL ICC PARAMETER OTHER additional quiescent supply current per control pin ON-resistance (peak) VI = VCC - 0.6 V; VS = GND or VCC; IO = 0 VS = GND to VCC; VI = VIH; see Fig.7 IS = 4 mA IS = 8 mA IS = 12 mA IS = 24 mA IS = 32 mA RON(rail) ON-resistance (rail) VS = GND; VI = VIH; see Fig.7 IS = 4 mA IS = 8 mA IS = 12 mA IS = 24 mA IS = 32 mA VS = VCC; VI = VIH; see Fig.7 IS = 4 mA IS = 8 mA IS = 12 mA IS = 24 mA IS = 32 mA RON(flatness) ON-resistance (flatness) VS = GND to VCC; VI = VIH; see Figs 9 to 13 IS = 4 mA IS = 8 mA IS = 12 mA IS = 24 mA IS = 32 mA 1.65 to 1.95 - 2.3 to 2.7 2.7 3.0 to 3.6 4.5 to 5.5 - - - - 100(2) 17(2) 10(2) 5(2) 3(2) - - - - - 1.65 to 1.95 - 2.3 to 2.7 2.7 3.0 to 3.6 4.5 to 5.5 - - - - 12 8.5 7.5 6.5 6 30 20 18 15 10 1.65 to 1.95 - 2.3 to 2.7 2.7 3.0 to 3.6 4.5 to 5.5 - - - - 10 8.5 7.5 6.5 6 30 20 18 15 10 1.65 to 1.95 - 2.3 to 2.7 2.7 3.0 to 3.6 4.5 to 5.5 - - - - 35 14 11.5 8.5 6.5 100 30 25 20 15 VCC (V) 5.5 - 5 500 A MIN. TYP. MAX. UNIT
RON(peak)
2004 Apr 13
6
Philips Semiconductors
Product specification
Bilateral switch
74LVC1G66
TEST CONDITIONS SYMBOL PARAMETER OTHER Tamb = -40 to +125 C VIH HIGH-level input voltage 1.65 to 1.95 0.65 x VCC - 2.3 to 2.7 2.7 to 3.6 4.5 to 5.5 VIL LOW-level input voltage 2.3 to 2.7 2.7 to 3.6 4.5 to 5.5 ILI IS input leakage current (control pin) analog switch OFF-state current analog switch ON-state current ICC quiescent supply current VI = 5.5 V or GND VI = VIH or VIL; |VS| = VCC - GND; see Fig.5 VI = VIH or VIL; |VS| = VCC - GND; see Fig.6 VI = VCC or GND; VS = GND or VCC; IO = 0 VI = VCC - 0.6 V; VS = GND or VCC; IO = 0 VS = GND to VCC; VI = VIH; see Fig.7 IS = 4 mA IS = 8 mA IS = 12 mA IS = 24 mA IS = 32 mA 1.65 to 1.95 - 2.3 to 2.7 2.7 3.0 to 3.6 4.5 to 5.5 - - - - - - - - - 150 45 38 30 23 5.5 5.5 1.7 2.0 0.7 x VCC - - - - - - - - - - - - - - - - - - 0.7 0.8 0.3 x VCC 100 200 V V V V V V V A A VCC (V) MIN. TYP. MAX. UNIT
1.65 to 1.95 -
0.35 x VCC V
5.5
-
-
200
A
5.5
-
-
200
A
ICC
additional quiescent supply current per control pin ON-resistance (peak)
5.5
-
-
5000
A
RON(peak)
2004 Apr 13
7
Philips Semiconductors
Product specification
Bilateral switch
74LVC1G66
TEST CONDITIONS SYMBOL RON(rail) PARAMETER OTHER ON-resistance (rail) VS = GND; VI = VIH; see Fig.7 IS = 4 mA IS = 8 mA IS = 12 mA IS = 24 mA IS = 32 mA VS = VCC; VI = VIH; see Fig.7 IS = 4 mA IS = 8 mA IS = 12 mA IS = 24 mA IS = 32 mA Notes 1. All typical values are measured at Tamb = 25 C. 2. RON flatness over operating temperature range (Tamb = -40 to +85 C). 1.65 to 1.95 - 2.3 to 2.7 2.7 3.0 to 3.6 4.5 to 5.5 - - - - - - - - - 45 30 27 23 15 1.65 to 1.95 - 2.3 to 2.7 2.7 3.0 to 3.6 4.5 to 5.5 - - - - - - - - - 45 30 27 23 15 VCC (V) MIN. TYP. MAX. UNIT
E VIL VIH
E
Y A VI = VCC or GND
Z A VO = GND or VCC GND
MNA660
Y A VI = VCC or GND
Z A VO (open circuit) GND
MNA661
Fig.5 Test circuit for measuring OFF-state current.
Fig.6 Test circuit for measuring ON-state current.
2004 Apr 13
8
Philips Semiconductors
Product specification
Bilateral switch
74LVC1G66
40 RON () 30
001aaa707
(1)
20
E VIH V Y VS = GND to VCC Z IS
0 10
(2) (3) (4) (5)
GND GND
MNA659
0
1
2
3
4 VI (V)
5
(1) (2) (3) (4) (5)
VCC = 1.8 V. VCC = 2.5 V. VCC = 2.7 V. VCC = 3.3 V. VCC = 5.0 V.
Measured at Tamb = 25 C.
Fig.7
Test circuit for measuring ON-resistance (RON).
Fig.8
Typical ON-resistance (RON) as a function of input voltage (VS) for VS = GND to VCC.
80 RON () 60
001aaa712
16 RON () 12
(1) (2)
001aaa708
40
8
(3) (4)
20
(1) (2) (3) (4)
4
0 0 1 2 3 4 VI (V) 5
0 0 1 2 3 4 VI (V) 5
(1) (2) (3) (4)
Tamb = +125 C. Tamb = +85 C. Tamb = +25 C. Tamb = -40 C.
(1) (2) (3) (4)
Tamb = +125 C. Tamb = +85 C. Tamb = +25 C. Tamb = -40 C.
Fig.9 RON for VCC = 1.8 V.
Fig.10 RON for VCC = 2.5 V.
2004 Apr 13
9
Philips Semiconductors
Product specification
Bilateral switch
74LVC1G66
16 RON () 12
(1) (2)
001aaa709
16 RON () 12
001aaa710
8
(3) (4)
8
(1) (2) (3)
4
4
(4)
0 0 1 2 3 4 VI (V) 5
0 0 1 2 3 4 VI (V) 5
(1) (2) (3) (4)
Tamb = +125 C. Tamb = +85 C. Tamb = +25 C. Tamb = -40 C.
(1) (2) (3) (4)
Tamb = +125 C. Tamb = +85 C. Tamb = +25 C. Tamb = -40 C.
Fig.11 RON for VCC = 2.7 V.
Fig.12 RON for VCC = 3.3 V.
16 RON () 12
001aaa711
8
4
(1) (2) (3) (4)
0 0 1 2 3 4 VI (V) 5
(1) (2) (3) (4)
Tamb = +125 C. Tamb = +85 C. Tamb = +25 C. Tamb = -40 C.
Fig.13 RON for VCC = 5.0 V.
2004 Apr 13
10
Philips Semiconductors
Product specification
Bilateral switch
AC CHARACTERISTICS TEST CONDITIONS SYMBOL PARAMETER WAVEFORMS Tamb = -40 to +85 C; note 1 tPHL/tPLH propagation delay Y to Z or Z to Y see Figs 14 and 16 1.65 to 1.95 2.3 to 2.7 2.7 3.0 to 3.6 4.5 to 5.5 tPZH/tPZL turn-ON time E to VOS see Figs 15 and 16 1.65 to 1.95 2.3 to 2.7 2.7 3.0 to 3.6 4.5 to 5.5 tPHZ/tPLZ turn-OFF time E to VOS see Figs 15 and 16 1.65 to 1.95 2.3 to 2.7 2.7 3.0 to 3.6 4.5 to 5.5 Tamb = -40 to +125 C tPHL/tPLH propagation delay Y to Z or Z to Y see Figs 14 and 16 1.65 to 1.95 2.3 to 2.7 2.7 3.0 to 3.6 4.5 to 5.5 tPZH/tPZL turn-ON time E to VOS see Figs 15 and 16 1.65 to 1.95 2.3 to 2.7 2.7 3.0 to 3.6 4.5 to 5.5 tPHZ/tPLZ turn-OFF time E to VOS see Figs 15 and 16 1.65 to 1.95 2.3 to 2.7 2.7 3.0 to 3.6 4.5 to 5.5 Note 1. All typical values are measured at Tamb = 25 C. - - - - - 1 1 1 1 1 1 1 1 1 1 - - - - - - - - - - - - - - - - - - - - 1 1 1 1 1 1 1 1 1 1 0.8 0.4 0.4 0.3 0.2 5.3 3.0 2.6 2.5 1.9 4.2 2.4 3.6 3.4 2.5 VCC (V) MIN. TYP.
74LVC1G66
MAX.
UNIT
2 1.2 1 0.8 0.6 12 6.5 6 5 4.2 10 6.9 7.5 6.5 5
ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns
3 2 1.5 1.5 1 15.5 8.5 8 6.5 5.5 13 9 9.5 8.5 6.5
ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns
2004 Apr 13
11
Philips Semiconductors
Product specification
Bilateral switch
AC WAVEFORMS
74LVC1G66
handbook, halfpage VI
Y or Z GND
VM
t PHL VOH Z or Y VOL VM
t PLH
MNA667
VCC 1.65 to 1.95 V 2.3 to 2.7 V 2.7 V 3.0 to 3.6 V 4.5 to 5.5 V
VM
VI
INPUT tr = tf 2.0 ns 2.0 ns 2.5 ns 2.5 ns 2.5 ns
0.5 x VCC VCC 0.5 x VCC VCC 1.5 V 1.5 V 2.7 V 2.7 V
0.5 x VCC VCC
VOL and VOH are typical output voltage drop that occur with the output load.
Fig.14 The input (VS) to output (VO) propagation delays.
2004 Apr 13
12
Philips Semiconductors
Product specification
Bilateral switch
74LVC1G66
handbook, full pagewidth
VI E GND t PLZ VCC Y or Z output LOW-to-OFF OFF-to-LOW VOL t PHZ Y or Z output HIGH-to-OFF OFF-to-HIGH VOH VY VM GND switch enabled switch disabled switch enabled
MNA668
VM
t PZL
VM VX t PZH
VCC 1.65 to 1.95 V 2.3 to 2.7 V 2.7 V 3.0 to 3.6 V 4.5 to 5.5 V
VM
VI
INPUT tr = tf 2.0 ns 2.0 ns 2.5 ns 2.5 ns 2.5 ns
VX = VOL + 0.3 V at VCC 2.7 V; VX = VOL + 0.1 x VCC at VCC < 2.7 V; VY = VOH - 0.3 V at VCC 2.7 V; VY = VOH - 0.1 x VCC at VCC < 2.7 V. VOL and VOH are typical output voltage drop that occur with the output load.
0.5 x VCC VCC 0.5 x VCC VCC 1.5 V 1.5 V 2.7 V 2.7 V
0.5 x VCC VCC
Fig.15 The turn-on and turn-off times.
2004 Apr 13
13
Philips Semiconductors
Product specification
Bilateral switch
74LVC1G66
handbook, full pagewidth
VEXT VCC PULSE GENERATOR VI D.U.T. RT CL RL VO RL
MNA616
VCC 1.65 to 1.95 V 2.3 to 2.7 V 2.7 V 3.0 to 3.6 V 4.5 to 5.5 V
VI VCC VCC 2.7 V 2.7 V VCC
CL 30 pF 30 pF 50 pF 50 pF 50 pF
RL 1 k 500 500 500 500
VEXT tPLH/tPHL open open open open open tPZH/tPHZ GND GND GND GND GND tPZL/tPLZ 2 x VCC 2 x VCC 6V 6V 2 x VCC
Definitions for test circuit: RL = Load resistor. CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to the output impedance Zo of the pulse generator.
Fig.16 Load circuitry for switching times.
2004 Apr 13
14
Philips Semiconductors
Product specification
Bilateral switch
ADDITIONAL AC CHARACTERISTICS At recommended conditions and all typical values are measured at Tamb = 25 C. SYMBOL dsin PARAMETER sine-wave distortion TEST CONDITIONS RL = 10 k; CL = 50 pF; fi = 1 kHz; see Fig.18 VCC (V) 1.65 2.3 3 4.5 RL = 10 k; CL = 50 pF; fi = 10 kHz; see Fig.18 1.65 2.3 3 4.5 fON(res) switch ON signal frequency response RL = 600 ; CL = 50 pF; fi = 1 MHz; see Fig.17; note 1 1.65 2.3 3 4.5 RL = 50 ; CL = 5 pF; fi = 1 MHz; see Fig.17; note 1 1.65 2.3 3 4.5 OFF(ft) switch OFF signal feed-through attenuation RL = 600 ; CL = 50 pF; fi = 1 MHz; see Fig.19; note 2 1.65 2.3 3 4.5 RL = 0 ; CL = 50 pF; fi = 1 MHz; see Fig.19; note 2 1.65 2.3 3 4.5 Vct crosstalk (control input to signal output) RL = 600 ; CL = 50 pF; fi = 1 MHz; tr = tf = 2 ns; see Fig.20 1.65 2.3 3 4.5 fmax frequency response (-3 dB) RL = 50 ; CL = 10 pF; see Fig.17; note 1 1.65 2.3 3 4.5 CPD power dissipation capacitance CL = 50 pF; fi = 10 MHz 2.5 3.3 5.0 Q charge injection CL = 0.1 nF; Vgen = 0 V; 1.65 to 5.5 Rgen = 0 ; fi = 1 MHz; RL = 1 M; see Fig.21; note 3
74LVC1G66
TYP. 0.032 0.008 0.006 0.001 0.068 0.009 0.008 0.006 135 145 150 155 >500 >500 >500 >500 -46 -46 -46 -46 -37 -37 -37 -37 69 87 156 302 200 350 410 440 9.8 12.0 17.3 0.05 % % % % % % % %
UNIT
MHz MHz MHz MHz MHz MHz MHz MHz dB dB dB dB dB dB dB dB mV mV mV mV MHz MHz MHz MHz pF pF pF pC
2004 Apr 13
15
Philips Semiconductors
Product specification
Bilateral switch
Notes
74LVC1G66
1. Adjust fi voltage to obtain 0 dBm level at output. Increase fi frequency until dB meter reads -3 dB. 2. Adjust fi voltage to obtain 0 dBm level at input. 3. Guaranteed by design.
handbook, full pagewidth
VIH
E
0.1 F
Y/Z
Z/Y RL
VO CL dB
fin
50 channel ON
1/2VCC
MNA669
Fig.17 Test circuit for measuring the frequency response when switch is ON.
2004 Apr 13
16
Philips Semiconductors
Product specification
Bilateral switch
74LVC1G66
handbook, full pagewidth
E VIH 10 F VO RL channel ON 1/2VCC
MNA670
Y/Z 600
Z/Y
fin
CL
DISTORTION METER
VCC 1.65 V 2.3 V 3V 4V
VI 1.4 V (p-p) 2 V (p-p) 2.5 V (p-p) 4 V (p-p) Fig.18 Test circuit for measuring sine-wave distortion.
handbook, full pagewidth
VIL 0.1 F
E
Y/Z RL channel ON
Z/Y RL 1/2VCC
VO CL dB
fin
50
1/2VCC
MNA671
Fig.19 Test circuit for measuring feed-through when switch is OFF.
2004 Apr 13
17
Philips Semiconductors
Product specification
Bilateral switch
74LVC1G66
handbook, full pagewidth
E
Y/Z 50 Rin 600 1/2VCC
Z/Y RL 600 1/2VCC
VO CL 50 pF
MNA672
Fig.20 Crosstalk.
handbook, full pagewidth
E
Rgen logic input
Y/Z
Z/Y 1 M
VO CL 0.1 nF
Vgen
MNA674
RL
handbook, full pagewidth
logic input (E)
off
on
off
VO
Vout
MNA675
Q = (Vout) x (CL)
Fig.21 Charge injection test.
2004 Apr 13
18
Philips Semiconductors
Product specification
Bilateral switch
PACKAGE OUTLINES
Plastic surface mounted package; 5 leads
74LVC1G66
SOT353
D
B
E
A
X
y
HE
vMA
5
4
Q
A
A1
1
e1 e
2
bp
3
wM B detail X Lp
c
0
1 scale
2 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.8 A1 max 0.1 bp 0.30 0.20 c 0.25 0.10 D 2.2 1.8 E (2) 1.35 1.15 e 1.3 e1 0.65 HE 2.2 2.0 Lp 0.45 0.15 Q 0.25 0.15 v 0.2 w 0.2 y 0.1
OUTLINE VERSION SOT353
REFERENCES IEC JEDEC EIAJ SC-88A
EUROPEAN PROJECTION
ISSUE DATE 97-02-28
2004 Apr 13
19
Philips Semiconductors
Product specification
Bilateral switch
74LVC1G66
Plastic surface mounted package; 5 leads
SOT753
D
B
E
A
X
y
HE
vMA
5
4
Q
A A1 c
1
2
3
detail X
Lp
e
bp
wM B
0
1 scale
2 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.9 A1 0.100 0.013 bp 0.40 0.25 c 0.26 0.10 D 3.1 2.7 E 1.7 1.3 e 0.95 HE 3.0 2.5 Lp 0.6 0.2 Q 0.33 0.23 v 0.2 w 0.2 y 0.1
OUTLINE VERSION SOT753
REFERENCES IEC JEDEC JEITA SC-74A
EUROPEAN PROJECTION
ISSUE DATE 02-04-16
2004 Apr 13
20
Philips Semiconductors
Product specification
Bilateral switch
DATA SHEET STATUS LEVEL I DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2)(3) Development DEFINITION
74LVC1G66
This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).
II
Preliminary data Qualification
III
Product data
Production
Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
2004 Apr 13
21
Philips Semiconductors - a worldwide company
Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
(c) Koninklijke Philips Electronics N.V. 2004
SCA76
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
R20/04/pp22
Date of release: 2004
Apr 13
Document order number:
9397 750 13018

▲Up To Search▲

Price & Availability of 74LVC1G66GW

	To Download 74LVC1G66GW Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .